Available as 3, 5 and 9mpx versions
User freindly software
Range of measurements available
Supplied with C-mount adapters for most eyepiece tubes
Micrometer for calibration supplied with each camera as standard
When attaching these cameras to a microscope it is desirable to capture the maximum amount of visual field in the camera. This is achieved by using a microscope C-mount connector 0.5x.
Each camera comes with a 0.5x C-mount adapter, with tube adapter to enable the adapter to fit eyepiece tubes 23mm, 30mm & 30.5mm diameter. Alternatively the camera can be fitted to the microscope with the manufacturers C-mount adapters.
All Microtec cameras come with camera control, capture and basic analysis software as standard. A range of measurements can be made including length, area, angles and item counting. Annotation is also available.
A stage micrometer for calibration is included with each camera.
Selecting the camera – The resolution of the camera required depends on the size and quality required of the images. The following table gives a guide to the maximum size of images that can be obtained with these cameras.
Prices (Excluding VAT and Delivery)
MDC-3C 3 Megapixel camera £575.00
MDC-5C 5 Megapixel camera £695.00
MDC-9C 9 Megapixel camera £995.00